DESCRIPTION
# FPCM13 solder-mask stripper was specifically developed to completely removes fully cured commercially available aqueous developing, liquid photo-imaging solder mask coatings caused by pre-masking processes or problems encountered during the solder masking stage. After mask stripping, the residual can easily be removed by pressure water spray or by light scrubbing with nylon brush, follow by water rinse. Salvage mask-removal boards can then reprocessed for masking.
Our cured solder mask stripper is specially for PCB factories.
Cured solder masks are difficult to remove. Our product will save the PCB manufacturers a lot of money so that the PCB can be reworked
again 。
|
|
|
|
| specifications︰ | PHYSICAL PROPERTIES
Appearance : Clear Straw liquid
pH :
Alkaline solution
Specific Gravity @25C 1.18 ± 0.01
Odour Almost odourless
|
| Advantages︰ | FEATURES
· Silicone / Phosphates Free
· Halide-Free, fully water-soluble
· Contains NO highly flammable alcohol
|
| Payment Details︰ | LC |
| Min Order︰ | 5 gals |
|
|
|
